How To Break An Xbox

Download Article

Download Article

This wikiHow teaches you how to diagnose and potentially fix a broken Xbox One, Xbox 360, or Xbox Archetype. Keep in mind that the majority of hardware bug yous'll encounter for any of these consoles cannot be fixed without a big degree of technical expertise; every bit such, it's wise to take your panel to a repair service rather than attempting to set up it yourself.

1. 1

   Make certain your panel is plugged in. Every bit light-headed as it sounds, your Xbox might not be working due to a loose connection either from the brick'southward cablevision to the console or from the cable to the brick. Earlier yous panic, make sure that a loose cablevision isn't the issue.

   • If your console is plugged in, attempt plugging it into a different wall socket.

2. 2

   Restart your panel. There are different means to do this depending on your type of Xbox, simply the easiest way to restart your console is by unplugging the ability cable from the console, waiting a full minute (or longer), and then re-plugging in the cable.

   Advertisement

3. iii

   Change your controller's batteries. If you're noticing laggy input from the controller, it's most likely not your console's fault: you can usually ready input problems by changing your controller's batteries.

   • You tin too use a difficult-wired controller instead of one that uses batteries.

4. iv

   Clean your panel of dust. Dust tin clog your console'due south exhaust ports, making it much easier for the console to overheat and malfunction. To remove grit from your console, wipe the whole console downwardly with a clammy textile, and so run a lite suction vacuum over each vent.

5. 5

   Make sure your console is properly ventilated. As with grit build-upward, poor ventilation can cause overheating. If your panel doesn't have plenty of space around it, move items to brand room.

   • You'll find poor ventilation symptoms when your console is in a cabinet, on superlative of another console, or in a tight space.

6. vi

   Try possible fixes for a failed update. If your Xbox 360 or Xbox One won't update fifty-fifty though you know that there'southward a new version of the operating arrangement, try the following:

   • Restart your console afterward failing an update, so endeavor updating again.
   • Connect your console to your Internet router via an Ethernet cable when trying to update.
   • Try updating at a later time (especially if the update simply came out, or if other people are using your Net network).

Advertisement

1. 1

   Sympathize the limitations. The Xbox One is significantly more technologically advanced than its predecessors, making hardware repair incredibly hard. If your Xbox One doesn't fall nether the following easily addressed categories, you'll demand to have your Xbox Ane into a repair service to have it fixed for y'all.

   • Opening and attempting to fix an Xbox One will void the console's warranty, and may result in irreparable harm to the console.

2. 2

   Try to set sound and video bug. I of the near irritating issues with which the Xbox One struggles is improper audio and video configuration for your idiot box. If you're able to turn on and use your Xbox 1, y'all'll can fix these problems past doing the post-obit:

   • Audio — Open Settings, select Display & Audio, select your current audio arrangement, and select your preferred preset (if you don't know what to select here, select Stereo Uncompressed.
   • Video — Open Settings, select Display & Audio, select TV Resolution, and select your preferred resolution. Keep in mind that the Xbox 1 cannot apply 1080i as a resolution.

3. 3

   Return an Xbox I that has a grinding disc drive. Some original Xbox One consoles have been reported to make a grinding noise when running a disc; in some cases, these drives have also scratched or cleaved the disc in question. Since this is a well-documented problem, Microsoft will replace your Xbox One if you transport it in.

   • You lot tin can contact Microsoft for repairs 1-800-4-MYXBOX.

4. iv

   Replace the power brick for a console that unexpectedly turns off. Xbox One power bricks are notoriously inefficient. If you notice that your Xbox One is freezing, turning off unexpectedly, refusing to restart properly, or otherwise acting up, replacing the power brick and cable that came with your console may fix the problem(south).

   • Xbox Ones can unexpectedly plow off due to overheating, poor ventilation, and blown circuits equally well. If replacing your Xbox One'south ability brick doesn't solve the trouble, yous'll need to ship in your Xbox One for repairs.

5. five

   Lubricate a noisy fan. If your Xbox One's fan sounds like it's working significantly harder than it should be, you can re-lubricate the fan by opening your Xbox Ane, removing the fan, and spritzing some sewing auto oil (non WD-40) onto the fan's bearings.^[one]

   • This won't necessarily fix issues you're having now, just it volition forestall problems such equally overheating and exhaustion after.

6. 6

   Contact Microsoft if you can't fix your Xbox One. If yous aren't able to ready your Xbox 1's problems using the steps above, you'll demand to send your Xbox One into Microsoft to have them diagnose and repair it. Xbox Ones are finicky, and attempting to fix issues that fall outside of the ones listed here may crusade irreversible damage to your console.

Advertizing

1. one

   Look for an mistake code on the Xbox 360's Power button. On your Xbox 360's Ability push button, there volition most likely exist i to iv ruby-red flashing lights displaying around the perimeter of the push button; these lights pertain to unlike problems.

   • If you don't see an mistake code when yous turn on the Xbox 360, skip ahead to the "Supervene upon the power brick" step.

2. 2

   Determine the error'south meaning. Depending on the number of flashing quadrants, the trouble could be one of four main things:

   • 1 reddish quadrant — Displays when a hardware component (east.g., the fan or a connected USB stick) stops working.
   • Two ruby-red quadrants — Signifies that your console has overheated. This will normally become away on its own, just you lot can take steps to ensure that information technology doesn't happen again.
   • 3 red quadrants — Indicates that a serious fault regarding one or more hardware components has occurred. This is the infamous "Ruby-red Ring of Decease" error.
   • Full red circle — Indicates that an A/V connexion has been lost. Yous won't encounter this for Xbox 360s which use HDMI cables.

3. three

   Fix a non-working hardware component fault. If you come across one cherry quadrant lite up on your Xbox 360'south Ability button, you'll also see an error code appear on the connected television. Since at that place are numerous codes you might see, the easiest way to accost your specific error is by typing the error code followed past xbox 360 error into a search engine, selecting a reputable search result, and post-obit the instructions.

   • Unfortunately, you'll take to take your Xbox 360 in for repairs if you can't address the error past looking it upwardly.

4. 4

   Address a console that constantly overheats. While your console's 2 flashing ruby-red lights will disappear on their own after the console comes down in temperature, in that location are a few things you can exercise to forbid your panel from overheating in the future:

   • Brand sure the panel has enough of infinite in all directions.
   • Lay your console horizontally, non vertically.
   • Clean any dust out of the console'southward vents (y'all can use a damp fabric or a vacuum for this).
   • Go on the console in a cool, dry out place; avoid having it in the sunday or near a heater.

5. 5

   Attempt to set up the Red Band of Death error . The Cherry Ring of Expiry is somewhat non-specific, but you may be able to fix it by applying a new layer of thermal paste to your Xbox 360's heat sinks.

   • As with near internal bug, the Blood-red Ring of Death is a trouble best left to professionals.

6. 6

   Set up the full cherry-red circle error. The easiest way to gear up this error is by using an HDMI cable to connect your Xbox 360 to your TV; if that isn't an option, check your current A/Five cables to encounter how they're plugged in. If they're loose, tighten them and so restart your console.

   • If your A/V cables are fine, yous'll demand to replace them.
   • If the mistake continues displaying fifty-fifty when using new A/V cables, your console's A/5 input may be broken. You lot tin either send your console in for repairs or switch over to a different brandish that allows you to apply an HDMI cable.

7. 7

   Ready a broken CD drive. Microsoft'south official policy for a CD drive that'due south stuck open up is to jerk the tray from side to side, wiggle information technology up and downwardly, and and so gently push button it close. If pressing the "Eject" button doesn't prompt the tray to popular out, you'll demand to have the Xbox 360 in for service.^[two]

   • If the CD drive is stuck shut, you can try opening it by pushing a bent paper clip into the "Squirt" hole on the front or back of the console. If this doesn't piece of work, your Xbox 360 needs service.
   • If the CD bulldoze works but won't read two or more of your game discs, try removing any attached USB items. If it still won't read your discs, you'll demand to take your Xbox 360 in for service.^[3]

8. 8

   Replace the ability brick. For problems not related to an error lawmaking (e.one thousand., unexpected close-downs), you may need to replace your Xbox 360'southward power source. This is considering Xbox 360 ability bricks have roughly 5 years of life before they begin to malfunction.^[four]

   • Malfunctioning ability bricks can also cause your Xbox 360 to freeze or otherwise under-perform.
   • If your Xbox 360 won't turn on even later replacing the power brick, check the USB slots to run across if any of their connectors are aptitude. Aptitude connectors can cause the Xbox 360 to fail to turn on; if they are bent, prying them loose with a screwdriver may set the problem.^[five]

9. ix

   Try using a dissimilar HDMI cablevision if your video is interim upwardly. If you employ an HDMI cable and your Xbox 360 isn't displaying video properly, yous tin can effort using a different HDMI cable to address the trouble.

   • Keep in mind that the problem may too lie with your TV, in which instance you'll either need to use a different HDMI port on your Idiot box or use a unlike Boob tube entirely.

10. 10

    Take your Xbox 360 into a repair service. If none of the above instructions have stock-still the problem y'all're having with your Xbox 360, you'll need to send information technology in for repairs.

Advertisement

1. 1

   Replace your Xbox's cables. These include the power cable and the A/V cables you're using. Since many Xboxes are nearly two decades one-time at this point, the technology that powers and connects your Xbox is probably due for an update.

   • You'll want to supersede your Xbox'south cables once every few years for optimal results.

2. 2

   Check your Xbox for an error light. If the Xbox's Power calorie-free is a different colour than usual or flashing, your Xbox encountered an mistake. Different error lights refer to unlike problems:^[half-dozen]

   • Solid red light — Your Xbox has overheated.
   • Flashing dark-green light — Your Xbox's BIOS was only partially loaded, resulting in a system crash.
   • Flashing alternate cerise and orangish light — Your Xbox's video output failed.
   • Flashing red and dark-green light — Your Xbox's general software or hardware failed.

3. 3

   Fix an overheated Xbox. If your Xbox overheated, you lot tin easily set it past unplugging it, placing it in a wide-open, cool space, and letting it cool downwardly for an hour or so. To forbid this from happening in the future, do the post-obit:

   • Identify your Xbox in a broad-open space.
   • Make sure your Xbox isn't in directly sunlight or near a heat source.
   • Don't leave your Xbox running when y'all aren't using it.
   • Clean out your Xbox'southward vents.

4. iv

   Effort fixing a partially loaded BIOS. The only way you tin can address this without modding your Xbox is by resetting your Xbox: remove the power cable, wait for at to the lowest degree one minute, plug back in the power cable, and restart your Xbox by pressing the Ability button.

   • If the BIOS still fails to load, you'll demand to take your Xbox into a professional repair service; even then, the Xbox may not be recoverable.

5. 5

   Accost a failed video output. Yous may be able to fix a failed video output past tightening your Xbox'due south A/V cables, but you might instead accept to replace the cables.

   • If you're not using the proprietary cables from Microsoft, brand sure your replacements are Microsoft-certified.
   • If you already replaced the cables, y'all may take to take your Xbox into a repair service to run across if the video output component inside of your Xbox is broken.

6. half dozen

   Have your Xbox into a repair service. If none of the above options gear up your trouble—or if y'all have a general software or hardware issue every bit evidenced by a flashing green and cerise lite—you lot'll need to take your Xbox into a repair service such as Best Buy.

Advertisement

Add New Question

• Question

  How practise I set a scarlet light?

  

  You can't. You can send the box dorsum to Microsoft, but the red low-cal ways your Xbox is dead.

Ask a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

Advertisement

• If you want to perform repairs yourself, you lot'll need to accept apart your Xbox. You can disassemble the post-obit models of Xbox with minimal fuss:

  • Xbox One
  • Xbox 360
  • Xbox Classic

• Microsoft will normally address common issues, such as the grinding disc drive problem, gratuitous of charge.

Advertising

• Opening Your Xbox will void your warranty and render the console ineligible for repair past Microsoft.

Advertisement

About This Article

Article Summary X

If your XBox is cleaved and y'all want to fix information technology, first check all of the cables to make sure they aren't loose. Next, try plugging in your XBox in a different spot to make sure the problem isn't with the wall socket. Wipe down the console with a clammy cloth and run a light suction vacuum over each vent to ensure grit isn't clogging the frazzle ports. If the problem started after a failed update, connect your console to your router with an Ethernet cable and try the update over again. For tips on fixing a specific model of XBox, similar an XBox One or XBox 360, keep reading!

Did this summary help you lot?

Cheers to all authors for creating a page that has been read 63,346 times.

Did this article assist you?

Source: https://www.wikihow.com/Fix-a-Broken-Xbox

Share this post